SoClean 2 Compatible Adapter for AirSense 11
SoClean Adapter for AirSense 11 Series
READ BEFORE PURCHASING!
Please Note: The SoClean 2 Compatible Hose Adapter For AirSense 11 is not designed to be used while the device is in therapy. Per the manufacturer, replace the SoClean 2 Compatible Hose Adapter after cleaning with the ORIGINAL chamber lid prior to CPAP Therapy to avoid Air Leaks while the device is in use.
Product Description
If you need to purchase an adapter for your CPAP Cleaner why not save yourself money in the process? This compatible, non-OEM hose adapter is required when using the SoClean 2 CPAP Cleaner with your ResMed AirSense or AirCurve 11 device to ensure a complete and effective cleaning cycle. Simply remove the lid from your current water chamber (be sure to keep the gasket and place in the new adapter lid), snap the compatible SoClean adapter onto your water reservoir, slide the reservoir back into your SoClean device, and connect the black injection tubing to the top of your newly installed adapter lid.
Please Note: The adapter will work with all SoClean models including the SoClean, SoClean 2, and SoClean 2 Go. No longer worry about compatibility issues!
Included in This Package
- (1) Compatible SoClean 2 Hose Adapter for ResMed Airsense/AirCurve 11 Models
Optional Accessories
Replacement Instructions
- Remove the water chamber from your ResMed device
- Carefully remove the lid from your chamber.
- Connect the new adapter lid with gasket to your water reservoir base and slide back into your ResMed CPAP Machine
- Lastly, connect the black injection tubing into the adapter lid and you are ready to use
Recommended Replacement Schedule
- Hose: Every 1-3 Months (or as needed)
- Filter(s): Every 1-3 Months (or as needed if noticeable build up)
- Water Chamber: Every 6-12 Months (or as needed)
- Mask: As Needed
- Actual Weight: 6 oz
- Associated Part Numbers: SCS11
- Condition: New
- Insurance Codes: E1399
- Latex Free: Yes
- RX Required?: No
- US Shipping Cost: 4.99
Ratings & Reviews
11 reviews
Junk
by Sponable
Junk... wait for better mousetrap... somebody knowledgeable in 3D Printing needs to start experimenting...
Leaks Badly
by Gunny -
Put this on my new cpap and it leaks terribly at the seal. It is a pain to trade out tops for cleaning on a daily basis.