Search
Shopping Cart
Your cart is empty.

Browse by Manufacturer

Secure Shopping

Payment Processing

AirFit™ N10 Nasal CPAP Mask With Headgear by ResMed


ratingratingratingratingrating
Your Price: $98.00

The AirFit™ N10 Nasal CPAP Mask by ResMed is the newest addition to the AirFit series of masks. This mask is 50% quieter than any other nasal mask on the market. The AirFit is loaded with features geared towards your comfort.
Manufacturer: ResMed

MPN: 63229
Product Options
Size:

Additional Options

* denotes required field

Add CPAP Tubing to My Order?*


free shipping tax free


AirFit™ N10 Nasal CPAP Mask With Headgear


Copy of Prescription Required When Applicable.

The AirFit N10 is the newest addition to ResMed's AirFit Series of CPAP Masks. The all new N10 adds an innovative magnetic headgear connection and unique frame design.

The AirFit N10 Nasal CPAP Mask covers both nostrils, and is 50% quieter than most other mask on the market. It's designed to be comfortable, lightweight, quieter, and very easy to use .

ResMed has done it again by making the design and characteristics of the ResMed AirFit™ N10 a Simplistic Nasal CPAP Mask that is Big on Comfort and compliance.


Remember ResMed also just released the NEW AirFit™ N10 For Her as well.


Features of the AirFit N10 Nasal CPAP Mask with Headgear


  • Magnetic Headgear clips: Magnets are inside the headgear clips and frame of the AirFit™ N10. Once looped through, the headgear is only a snap away from being connected. This makes taking the mask off and placing back on during the night very easy. There is a lip on the opposite side of the clip, keeping the magnet in place even under the tightest headgear configurations, so there is no problems with it slipping.

  • Spring Air™ Dual-Wall Cushion: The AirFit™ N10 nasal cushion has a dual wall system which promotes consistency. The outer wall seals while the inner wall stabilizes. It features a clip which is used to quickly release the cushion from the mask frame. The N10 mask is available in two cushion size configurations: standard or wide.

  • Minimal Contact Points: The upper arms of the AirFit™ N10 frame are designed in a curved pattern which hover over the cheeks, allowing for minimal contact with the face.

  • Circular Venting: The N10 frame has a ring of small exhalation ports which directs the air in various directions away from the user and bed partner.

  • SoftEdge™ Headgear: The included SoftEdge™ headgear aims to provide a comfortable, stable fit and promote a proper seal. The very Soft headgear reduces the chance of red marks. The headgear has four points of adjustment for an optimal fit. The crown strap which sits on top of the head adds stability and helps maintain cushion placement. The AirFit™ N10 headgear is gray on the outer side and light blue on the inner side.

  • Soft Wraps Included Soft wraps are included with the AirFit™ N10 and are placed over the clear silicone frame, they add comfort to your face if it should rest against your cheeks.

Important Note: The AirFit™ N10 cushion is permanently attached to its clear acrylic clip, and cannot be separated. The size of the cushion is found on the bottom in black lettering. To identify proper orientation, the larger clip is the top, while the smaller clip is the bottom.

Short Tube: The short tube cannot be removed from the mask frame.


Included with This Purchase

  • AirFit N10 Nasal CPAP Mask (Choice of Size)
  • Headgear
  • Short Tube Assembly



Product Category:Health & Beauty > Health Care > Respiratory Care > PAP Masks
GTIN:619498632008
Warranty:90 day manufacturer defects
Actual Weight:1 lb
US Shipping Cost:Free
RX Required?:Yes
Associated Part #'s:63200, 63229, 63202
Insurance Codes:A7034, A7035
FAA Aproved:Yes
International Shipping:Yes International Shipping is available, Yes
Brand/Manufacturer:ResMed
Condition:New

Product Reviews

Rate This Product:
or Create a Review
(69 Ratings, 0 Reviews) Average Rating:
ratingratingratingratingrating

Other Customers Also Bought These CPAP Products

AirFit™ P10 Nasal Pillow CPAP Mask by ResMed
AirFit™ P10 Nasal Pillow CPAP Mask with Headgear by ResMed
MSRP: $129.00
Your Price: $85.00
You Save: $44.00
AirFit™ P10 Nasal Pillow CPAP Mask with Headgear by ResMed
ratingratingratingratingrating
free shipping tax free
The Airfit ™ P10 by ResMed is the newest and quietest ultra-light nasal pillow CPAP mask on the market. This CPAP mask is simplistic, with only 3 parts and weighs in at only 1.6oz. Available in AirFit for Him and Airfit for Her models. Part number 62900
AirFit For Her Nasal Pillow Mask Without Headgear
AirFit™ P10 for Her Nasal Pillow CPAP Mask Kit by ResMed
Your Price: $69.00
AirFit™ P10 for Her Nasal Pillow CPAP Mask Kit by ResMed
free shipping tax free
ResMed AirFit™ P10 For Her Nasal Pillow CPAP Mask (without) Headgear is the mask frame for the AirFit™ P10 and the AirFit™ P10 for Her Nasal Pillow CPAP Mask. This product does not require a prescription for purchase. New nasal pillow CPAP masks for 2014
AirFit F10 Full Face Mask With Headgear
AirFit™ F10 Full Face CPAP Mask with Headgear by ResMed
Your Price: $149.00
AirFit™ F10 Full Face CPAP Mask with Headgear by ResMed
ratingratingratingratingrating
free shipping tax free
The AirFit F10 is the latest full face CPAP mask on the market for 2014 by ResMed and completes the Airfit family of masks including the AirFit P10 nasal pillow and AirFit N10 nasal. This line of ResMed masks are also available in the "For Her" models.
AirFit F10 Full Face CPAP Mask without Headgear
AirFit™ F10 Full Face CPAP Mask Kit by ResMed
Your Price: $139.00
AirFit™ F10 Full Face CPAP Mask Kit by ResMed
free shipping tax free
AirFit F10 ResMed full face CPAP mask with optional headgear. You can order this mask with or without headgear; a great solution for people that need certain parts for the mask or need to itemize their mask for lack of prescription. # 61301, 61302, 63103