Skip to product information
1 of 12

ResMed

AirSense 10 Elite CPAP - Certified Refurbished

AirSense 10 Elite CPAP - Certified Refurbished

SKU:37205 -PO

Regular price $479.00 USD
Regular price Sale price $479.00 USD
Sale Sold out
Shipping calculated at checkout.

View full details

AirSense 10 Elite -Certified Refurbished

Copy of RX Required if Applicable to U.S Residents

New Product Information Listed Below

Many new users to CPAP may be confused about which model is right for them. On one hand, you have Auto CPAP devices and on the other, you have fixed pressure "standard CPAP" machine, so what's the difference? The Elite, a fixed pressure model, provides one setting of therapy throughout your night's sleep and does not fluctuate from that setting unless a ramp feature is enabled. Ramp is a feature that increases therapy from the minimal amount to the prescribed amount over a period of time to allow you to fall asleep on a lower setting.

Fixed pressure devices are the most commonly prescribed devices and your physician establishes this number (i.e. 8cm/H2O) based off of your titration from the sleep lab. In cases where a home sleep test was used and an auto CPAP trialed, he/she may set it based on a compliance report of the median average of therapy needed.

We program your settings as listed on your CPAP prescription and can make changes to your settings as they adjust over time via an SD card that can be mailed to our office. Many veteran users of therapy elect to use a fixed setting they have used and are comfortable with (some even elect to forego ramp feature). The AirSense™ 10 Elite continues the superior quality of therapy device where the S9 Elite left off. Still available in the new model is EPR (expiratory pressure relief) as well as new modification to ramp setting with AutoRamp. SmartStart allows the user to put on his/her mask and begin breathing and the machine will turn on to start therapy.


Important Note: Every Certified Refurbished CPAP Machine comes with a 90 day limited warranty however, you can extend your warranty out to an entire year for ONLY $99.00!


AirSense™ Series Features

  • HumidAir integrated heated humidifier is built into the CPAP device. You can use the ClimateLine™ Air heated hose tube or a standard SlimLine™ lightweight hose tube.
  • AutoRamp technology starts your therapy pressure at a low setting and increases therapy pressure once sleep onset is detected. This is a great feature for new CPAP users to adjust to pressure as they wake up throughout the night the device will drop the pressure to allow the user to get back to sleep faster without the feeling of an overwhelming high-pressure setting and without the need to manually hit the ramp button again.
  • ClimateLine™ Air The integrated heated humidifier is now a standard feature and the option to purchase with standard SlimLine™ hose tubing or ClimateLine™ heated hose tubing. The heated line tubing is great for people that are sensitive to dryness from the use of CPAP and it promotes humidity throughout the entire hose.
  • Advanced Event Detection can tell the difference between obstructive sleep apnea events or central apnea events (central sleep apnea is treated with Bi-level therapy or ASV therapy and is most often not treated with standard CPAP pressure).
  • SmartStart: Allows you to simply put the mask on and start breathing which will initiate the device to turn on automatically and begin therapy. Please note this setting is not activated when we ship your device unless you specify otherwise.
  • Wireless Data Transmission: Transmits compliance data via a wireless signal (Only available for use in the United States).

Included With Purchase

  • (1) AirSense™ 10 Elite Fixed Pressure CPAP Machine - Certified Refurbished
  • (1) New Filter
  • (1) New Universal CPAP Hose
  • (1) New Water Chamber Tub
  • (1) Travel Case
  • (1) Power Supply
  • Owner Manual
  • 90 Day Warranty

Optional Accessories for Purchase

  • Cleanable Water Chamber Tub
  • DC/DC Converter
  • Standard and Hypo-Allergenic Filters
  • Hose Tubing Options: ClimateLine, SlimLine, and Standard

Indications for use AirSense 10 Elite

The AirSense 10 Elite fixed pressure device is indicated for the treatment of obstructive sleep apnea (OSA) in patients weighing more than 66 lb (30 kg). It is intended for home and hospital use. The humidifier is intended for single patient use in the home environment and re-use in a hospital/institutional environment.


Contraindications

Positive airway pressure therapy may be contraindicated in some patients with the following pre-existing conditions:

  • severe bullous lung disease
  • pneumothorax
  • pathologically low blood pressure
  • dehydration
  • cerebrospinal fluid leak, recent cranial surgery, or trauma.

Possible Adverse effects

You should report unusual chest pain, severe headache, or increased breathlessness to your prescribing physician. An acute upper respiratory tract infection may require temporary discontinuation of treatment.

The following side effects may arise during the course of therapy with the device:

  • drying of the nose, mouth, or throat
  • nosebleed
  • bloating
  • ear or sinus discomfort
  • eye irritation
  • skin rashes
  • AC Power: 100-240V, 50-60Hz
  • Actual Weight: 44 oz (2.75lbs)
  • Altitude Compensation: Auto
  • Associated Part Numbers: 37205
  • Battery Power: Optional DC/DC Converter Sold Separate
  • Compliance Meter: On screen display
  • Condition: Refurbished
  • Data Storage Content: SD Card or Wireless Transmission (US Only) to Provider
  • DC Power: 24V ---3.75A
  • Dimensions: 4.57" x 10.04" x 5.91"
  • FAA Approved: Yes
  • Filters: Standard or Hypo-Allergenic Disposable
  • Humidifier: Integrated with Optional Heated Tubing
  • Insurance Codes: E0601 HCPC
  • International Shipping: Yes, Available
  • Latex Free: Yes
  • Material Content: Flame Retardant Thermoplastic
  • Mode of Operation: Fixed Pressure Only
  • Pressure Range: 4cm-20cm/h2O  fixed pressure
  • Ramp Time: Auto adjusting ramp feature
  • RX Required?: Yes, When Applicable to U.S. Residents
  • Shipping Weight: 6lbs
  • Special User Features: AutoRamp, Integrated Humidifier
  • Ramp Pressure: AutoRamp starting at 4cm/h2O
  • Travel Sized: Yes
  • US Shipping Cost: Free Standard Ground
  • Warranty: 90 Day Standard- Extended Available

Q: How do I Adjust the AirSense/AirCurve 10 Comfort Settings?

A: To access and personalize your settings on the AirSense/AirCurve 10 machine, rotate the dial to highlight "My Options." Once the desired option is highlighted, press the dial to view and adjust your current settings.

Q: How Do I Adjust the Humidifier Settings?

A: In My Options, turn the dial to highlight Humidity Level and then press the dial.

Turn the dial to adjust the humidity level and press the dial to save the change. If you’re getting a dry nose or mouth, turn up the humidity. If you’re getting any moisture in your mask, turn down the humidity.

The humidifier enhances the air's moisture content, ensuring a more comfortable therapeutic experience. Equipped with the Climate Control enhanced Auto setting, this device automatically adjusts temperature and humidity to optimal levels for maximum comfort. Simply plug it in, press Start and enjoy a relaxing treatment.

You can also manually set the Humidity Level to Off or between 1 and 8, where 1 is the lowest humidity setting and 8 is the highest humidity setting. (Note: if you’re using a ClimateLineAir™ heated tube, you will need to turn the Climate Control setting on your device from “Auto” to “Manual” to access the humidity level setting.)

Q: How Do I Adjust Ramp Time?

A: In My Options, turn the dial to highlight Ramp Time and then press the dial.

Turn the dial to adjust the ramp time to your preferred setting and press the dial to save the change. Ramp Time is designed to make the beginning of therapy more comfortable and is the period during which the airflow pressure increases from a low start pressure to your prescribed treatment pressure. You can set your Ramp Time to Off, from 5 to 45 minutes.

Q: How Often Should I Replace AirSense/AirCurve 10 Machine Parts?

A: Regularly maintain your CPAP supplies, as dirt and wear can affect them. Check the water tub, air tubing, and filter frequently for damage.

Water Tank: Replace if it is leaking or has become cracked, cloudy or pitted. Replace if the seal is cracked or torn. Remove any white powder deposits using a solution of one part household vinegar to 10 parts water.

Hose Tubing: Replace if there are any holes, tears or cracks.

Machine Filter: Check the air filter and replace it at least every six months. Replace it more often if there are any holes or blockages by dirt or dust.

Customer Reviews

Based on 20 reviews
70%
(14)
30%
(6)
0%
(0)
0%
(0)
0%
(0)
S
Sandy C.C.
Comfortable CPCP in use

Fantastic machine, Very Quiet, comfortable, easy to use.

R
Randy
Great value!

Great value. Got mine and it works great with low running hours and preset for my prescriptions. It was a great choice.

R
Russ K.
Cheap

Good price for a backup unit. Works well, comes with all new stuff. Good buy so far.

H
Harry D.
No complaints

Great machine at a great price! No complaints.

A
Anthony B.
Good

I received my device a few weeks ago and have used it every night since. No complaints, it is compact and quiet, with a great price tag.