Phillips Respironics System One Pro With Humidifier
Philips Respironics System One DS460HS CPAP -Certified Refurbished
Copy of RX Required if Applicable to U.S Residents
This Philips Respironics System One REMstar Pro CPAP with Humidifier is a certified refurbished model used for the treatment of sleep apnea. This is the System One 50 series model number DS460HS. All product information for this model can be found below. Extended warranty options are available on refurbished CPAP and BiPAP Machines.
New Product Information Listed Below
AutoIQ technology is one of the most sophisticated Auto CPAP Machines available. Auto CPAP Machines deliver variable pressure based on the data the machine receives from your air flow. The machine sends a signal out every 4 seconds and calculates whether to increase your pressure or decrease your pressure based on the presence of apnea events. AutoIQ technology takes that principle a step further. The DS460HS Auto IQ will zero in on the adequate minimum and maximum pressures bringing you closer to the optimal pressure range. An Auto CPAP machine that is wide open would be set with a minimum pressure of 4cm and a maximum pressure of 20cm. With the DS460HS AutoIQ CPAP machine it will decide based on an auto trial that will narrow the gap of pressure settings based on the data the machine has received during the Auto trial-phase. Once the data has been accumulated, the machine will set its pressure to the best suited pressure based on the 30 day recordings.
You as the user can extend your Auto trial up to 30 days to determine what your optimal pressure range should be.
This Auto trial can be repeated at anytime as your pressure needs may change over time. 1800CPAP can help you with the changes and auto trials at anytime you feel the needs of pressures may be different due to weight differences, getting older or health condition changed. You can send in your data card that stores all of the information and we can make changes for you as necessary. We are committed to helping you get the most comfort and ideal CPAP therapy. The 60 series AutoIQ CPAP machine is a great place to start for comfort. The new 60 series CPAP machines also have the capability of a heated tube to deliver the best humidification experience ever.
The product labeled DS460HS does not have the heated humidifier needed to use the heated tubing, but can be purchased at any time you feel the humidification you are receiving is inadequate. The optional add-on heated humidifier is called a System One 60 Series heated tube humidifier and is part number DS6T. Given the proper humidity can cut back the need for as much pressure, but more importantly, it is more comfortable. You can find the PR System One REMstar Pro C-Flex with heated tube humidifier DS460TS on our site as well and that option does come with the heated tube and proper heated tube humidifier.
Important Note: Every Certified Refurbished CPAP Machine comes with a 90 day limited warranty however, you can extend your warranty out to an entire year for ONLY $99.00!
The PR System One REMstar 60 Series is FAA Approved
- Approved by the FAA for use on all commercial flights within the US and all international flights that depart or arrive in the US.
- Always contact your airline prior to your flight to confirm any requirements they may have -- such as a copy of your prescription and/or a letter of medical necessity -- for allowing your CPAP/BiPAP on board.
PR System One REMstar Pro C-Flex 60 series AutoIQ Features Include:
- System One Humidity Control part of the original "System one technology"
- Water Chamber Redesign
- New Modern Design
- Flex Technology "Creates pressure relief on exhalation"
- System One Resistance Control
- On Screen Data with LCD Display
- Auto-trial for up to 30 consecutive days
New design for the AutoIQ
The PR System One REMstar 60 Series AutoIQ CPAP Machine and Humidifier display a modern look with a richer charcoal color and metallic silver as accents on the control and side panels. The control dial has been changed to be more user friendly.
Flex technology is groundbreaking in CPAP compliance. People new to CPAP therapy find adapting to treatment much easier when the airflow pressure is reduced during exhalation. The 60 Series CPAP offers C-Flex, C-Flex Plus and A-Flex modes. You can choose what mode to use based on your therapy. This machine can be set for Auto Trial (then to fixed pressure) or just fixed pressure CPAP Mode.
C-Flex delivers comfortable sleep therapy through pressure relief at exhalation. Pressure is lowered based on a breath-per-breath analysis and provides up to 3 levels of relief based on the user's expiratory flow. C-Flex Plus softens the breathing cycle between inhalation and exhalation based on expiratory flow. It minimizes the transition between pressures and provides greater comfort when in the fixed-pressure CPAP mode. The A-Flex comfort feature is built on top of the REMstar Auto algorithm which provides the lowest pressure needed to keep the airway open during sleep. A-Flex adjusts to deliver pressure as needed to eliminate breathing events without raising it too high.
System One Resistance Control
In order to deliver optimal pressure Respironics developed a numbering system to note the resistance characteristics of each mask. Using the Resistance Control number, the machine compensates for the mask being used to provide consistent and reliable pressure. Each mask is made with what is called an intentional leak. The Resistance control understand's these leaks and adjusts accordingly always delivering optimal pressure for your therapy.
On Screen Data Display
Sleep data is available on the display screen of the System One 60 Series CPAP machine. See the Apnea/Hypopnea Index, leak rate as well as the 7 and 30 day average pressure readings. Data is stored in both an on-board memory and a generic SD memory card. This technology can be very useful if your doctor needs to see if a new pressure is working quickly. It can also be beneficial if you feel like your experiencing heavy mask leaks or a change in therapy.
Important Compatibility Note of the PR System One 60 Series
The components of the PR System One REMStar 60 Series CPAP with Heated Humidifier and/ or Heated Tube Humidifier can only be used together as a system. The Heated Tube CANNOT BE used with any other PR System One machine or humidifier, only the Heated Tube Humidifier (part number DS6T). The external power supply used by this system IS NOT compatible with other units in the Philips Respironics line of products. Also, the power supply is different based on the humidifier you have with the machine. The machine by itself with a regular heated humidifier (no heated tubing) uses a 60 watt power supply (part number 1091398) and the machine with the heated tube humidifier uses an 80 watt power supply (part number 1091399)
The REMStar 60 Series CPAP is not compatible with earlier versions of the PR System One Heated Humidifier.
The machine and humidifier in the PR System One REMStar 60 Series CPAP with Heated Humidifier and Heated Tube assembly cannot physically be attached to earlier versions in the Philips Respironics line of products.
Included in This Package
- (1) System One REMstar Pro CPAP - Certified Refurbished
- (1) Standard Heated Humidifier - Certified Refurbished
- (1) Power Supply
- (1) New CPAP Hose
- New CPAP Filters
- (1) New Humidifier Water Chamber
- (1) Travel Case
- Owners Manual
- 90 Day Warranty
|AC Power:||110v and 240v (60 Watt Power Supply DS460S and DS460HS/ 80 Watt Power Supply DS460TS)|
|Actual Weight:||3lbs 1.36kg|
|Associated Part Numbers:||DS460S, DS460HS, DS460TS|
|Canadian Part Number:||CA460HS|
|Compliance Meter:||Breathing Detection|
|Country of Origin:||USA|
|Data Storage Content:||AHI, Median pressure, Leak|
|DC Power:||DC cable|
|Dimensions:||7" L x 5.5" W x 4" H 18 cm L x 14 cm W x 10 cm H|
|Electrical Requirements:||100 - 240 VAC, 50/60 Hz (An adapter wil be needed to plug the CPAP into a wall outlet outside the US|
|Filters:||Pollen (Foam) and optional ultra-fine (Disposable)|
|Humidifier:||Heated with Humidity control which senses ambient humidity in the room|
|International Part Numbers:||IN461HS|
|International Shipping:||Yes International Shipping is available|
|Mode of Operation:||Fixed pressure, Auto trial min 3 days, Max 30 days|
|Pressure Range:||4cm min 20cm max|
|Ramp Time:||0-45 minutes patient adjustable|
|RX Required?:||Yes, When Applicable to U.S. Residients|
|Shipping Weight:||6 Lbs 12 Oz|
|Special User Features:||C-Flex, C-Flex plus, A-Flex: Resistance Control: Humidity Control: Heated tubing: AutoIQ|
|Starting Ramp Pressure:||4cm to patient adjustable|
|US Shipping Cost:||Free Standard Ground|
|Warranty:||90 Day Limited|
Ratings & Reviews
1 review5 out of 5
WOW. I LOVE THIS CPAP CONCEPT
by Ronald Bach (Washington) -
For those of you not sure about what to get you need to check this machine out. It uses an automatic adjustment for 30 days that finds the best pressure for you then it sets your pressure to the one that works best for you. If I ever need it changed again I just have it set to take a new 30 day average. WoW. I am glad I called these guys about my options.