Shopping Cart
Your cart is empty.

Browse by Manufacturer

Secure Shopping

Payment Processing

Qtube Replacement Foam Kit by Human Design Medical

Q-Tube Foam Replacement Kit
Your Price: $5.99

Qtube Replacement Foam Kit is a replacement kit for the Qtube In-Line Muffler Kit. Includes O-Ring, foam material, and a new plastic sleeve.

free shipping tax free
Manufacturer: Human Design Medical
SKU: HD60-2550

Same Day Shipping!

Qtube Replacement Foam Kit

The Qtube replacement Foam Kit is a replacement kit for the Qtube In-Line Muffler Kit

The Qtube replacement kit extends the life of the Qtube Muffler, by replacing the worn out components.

Disassembly of the Qtube:

  • Lift the cap from the Qtube body by placing a finger in the intended slot. Push upward causing the cap to disconnect from the device.
  • Grip the End Cap and move in a clockwise direction to align the pins with the designated indentions on the Qtube body. Pull upward on the End Cap to dislodge the piece from the body of the device.
  • Remove the foam layer.
  • To further remove and replace the foam layer, release the clasps on the exterior of the plastic sleeve.

Re-Assembly of the Qtube:

  • With the plastic sleeve open, lay a new, fresh piece of foam in the middle of the sleeve with equal distance between the rolled foam and the tabs. Then, gently pull the plastic tabs over the foam allowing them to lock in the middle.
  • Place the plastic sleeve with the foam back into the body of the Qtube. Inspect the device to ensure nothing has fallen lose which may potentially obstruct the user's airway.
  • Place the O-Ring and the End Cap into place. The O-Ring will need to rest at the bottom of the End Cap. Move the End Cap to re-align the pins with the designated indentions. Move the End Cap in a counter clockwise direction and push downward to confirm the piece is back in position.
  • Grab the cap and re-attach to the Qtube

Replacing the Foam Layer

To ensure optimal results, replace the foam layer every 30 days or upon visible deterioration.

Included with this Purchase

  • 1 - Foam Baffling Material
  • 1 - Plastic Sleeve
  • 1 - O-Ring

Product Category: Health & Beauty > Health Care > Respiratory Care
GTIN: 859477004185
Mode of Operation: Replacement Foam Kit
Actual Weight: 1 ounce
US Shipping Cost: Free
Dimensions: Foam: 3.75 in L x 2.75 in W x 0.25 in H , Plastic Sleeve: 4.5 in L x 2.75 in W ,O-Ring: 1.25 in
RX Required?: No
Latex Free: Yes
Associated Part #'s: HD60-2550, HD60-2500, qtube
Material Content: Foam: 3M Open Cell Foam , Plastic Sleeve: Polycarbonate , O-Ring: Medical Grade Silicone (No Protein
Condition: New

Product Reviews

Rate This Product:
or Create a Review
(2 Ratings, 0 Reviews) Average Rating:
Item Number: HD60-2550
Manufacturer: Human Design Medical
SKU: HD60-2550
Same Day Shipping!