CPAP Mask Care Stand by AG Industries
AG Industries CPAP Mask Care Stand
This Product DOES NOT Require a Prescription
The CPAP mask care stand can be used on your nightstand for storing your CPAP mask after a night of sleep therapy. The stand has two adjustable arms with a wide base for balance. The stand takes up very little room while providing a safe place to keep your CPAP mask in a more sanitary environment.
The mask stand is also perfect for air drying your mask after cleaning. The slope of the stand is designed to dangle the CPAP mask above the surface allowing it to shed water from the morning cleaning. Air drying without your mask touching any surfaces that may be contaminated with germs.
The stand is compatible with nearly all CPAP masks and can be adjusted to lift nearly all masks from the surface.
Cleaning Tips: Use a soft cleanser or wipe to maintain the cleanliness of the stand. Remember the arm of the stand will touch the mask, so make sure the cleansers are those used to clean the CPAP mask.
Special Features & Benefits
Easy to Assemble - Quick and Easy, No tools needed, Four small pins extend from the bottom of the mask stand arm, insert the pins into the slots on the mask stand base, creating a seamless connection between the independent parts.
Multipurpose - Use the CPAP Mask Stand to store your mask for safe-keeping. Air Drying, the CPAP mask can safely air dry throughout the day. Dry and suspended above the surface, ready for the next use.
Compatibility - A mask with forehead support works great with the mask stand. Open the prongs to produce a small distance between the arms, then place the forehead support across the arms so the weight of the mask is distributed evenly. A Mask without a forehead support, place the cushion or headgear over the prongs. If you wear a nasal pillow mask, loop the headgear over the prongs to lift the mask from the surface.
Included with this Purchase
- (1) CPAP Mask Stand
Recommended Replacement Schedule
- Hose: Every 1-3 Months (or as needed)
- Filter(s): Every 1-3 Months (or as needed if noticeable build up)
- Water Chamber: Every 6-12 Months (or as needed)
- Mask: As Needed
|Actual Weight:||3.7 ounces|
|Associated Part Numbers:||AG-CLN-STAND|
|Dimensions:||Arm: 9.5 in L x 1 in W, Base: 5.5 in L x 7 in W, Stand: 9.5 in H|
|International Shipping:||Yes, International Shipping is Available|
|Special User Features:||Mask Stand for storing or air drying your CPAP Mask|
|US Shipping Cost:||Free Standard Ground|
Ratings & Reviews
1 review1 out of 5
by Christopher -
I needed somewhere to store my mask when im not using it. This seemed practical at the time, however, all it does is put my mask on display. I think ill just store it in the drawer.