AirFit F40 Full Face with Optional Headgear
ResMed AirFit F40 Mask Kit
This Product DOES NOT Require a Prescription
This CPAP mask features magnetic headgear clips, which could potentially interact with certain medical implants or devices, including pacemakers. It is essential to consult a physician before use to discuss any possible adverse effects and ensure safe usage.
Description
The newly released AirFit F40 by ResMed is the latest addition to their full-face CPAP mask range. This innovative mask offers 3 size options, catering to a wide range of users. These include small/wide, medium, and large cushion seals. The standout feature is the AdaptiSeal™ cushion, which adapts to the user's facial contours, ensuring a secure and comfortable seal, even during sleep position changes. The flexible mask frame reduces adjustment points, making it user-friendly and comfortable for all-night wear.
Special Features and Benefits
- New AdaptiSeal™ Cushions: Soft silicone adapts to the face, designed to maintain seal.
- QuietAir™ Diffused Venting Integrated into the cushion to provide a more peaceful bedroom environment.
- Flexible Mask Frame: Plastic frame covered by a soft nylon fabric padding. The frame sits below the eyes, designed for comfort and to reduce facial marks.
- Magnetic Clips: Easily snaps on and off, even in the middle of the night.
- Quick-Release Elbow: Makes it easy to connect and disconnect to therapy.
- Headgear Adjustment Points: Two upper and two lower adjustment points simplifies fitting and use.
Included with this Purchase
- (1) AirFit F40 Full Face CPAP Mask Frame and Cushion
- (1) Optional Standard Size Headgear Can Be Added to Make Complete Mask System
Recommended Replacement Schedule
- Cushion: Every 1-3 Months (or as needed)
- Headgear: Every 3-6 Months (or as needed)
- Complete Mask: Every 9-12 Months (or as needed)
- Tube Hose: Every 1-3 Months (or as needed)
- Actual Weight: 3.2 Ounces
- Associated Parts: 64600, 64601, 64602, 64603, 64604
- Condition: New
- Country of Origin: USA
- Insurance Codes: A7034, A7035
- Latex Free: Yes
- Mode of Operation: Full Face
- RX Required?: No
- Shipping Weight: 1 lb.
- US Shipping Cost: Free
How often should I replace mask parts?
The typical lifespan of your cushion or headgear is 3-6 months, however some people may require replacing monthly. Different parts require replacement at varying intervals. Taking care of your CPAP equipment is important, especially those parts which can be affected by dirt, oil and residue from your skin. Poorly cleaned CPAP masks can cause discomfort and skin irritation.
Can I use an ozone device to clean my CPAP mask?
Ozone or UV light products have not been validated for use with the mask. Use of ozone or UV light products may discolor or damage your CPAP mask during the warranty period and that will not be covered.
Ratings & Reviews
2 reviews
Very Comfortable Mask
by Kim Ting -
I'm new to to cpap therapy, it was hard to get used to my previous mask F30. After changing to the F40, I was finally able to sleep. I think the problem is my nose is quite flat and air was leaking out of the F30. For some reason, in the same size, F40 provides a better seal and it much more comfortable. Air is still leaking occasionally but it's not so bad. Sometimes adjusting too tight is also not good.
My Favorite Mask So Far
by Bill
I have been a loyal user of full-face masks for approximately ten years since commencing my ASV therapy journey. However, despite trying various sizes and configurations, including both silicone and foam options, I have never found them to be particularly comfortable. Initially, I was somewhat hesitant to believe that a pillow-type mask could offer a superior experience, but I was determined to give it a chance in the hopes of discovering a more enjoyable and comfortable solution. The F40 model has exceeded my expectations and proven to be significantly more comfortable than its predecessors, the F20 and F30.