Eson™ CPAP Mask Replacement Headgear Strap by Fisher & Paykel
The Fisher & Paykel Eson™ nasal CPAP mask uses a fabric headgear strap to hold the mask in place during sleep. This head gear strap should be washed by hand and left out to air dry to remove the oils from the user's hair. If it has lost elasticity it is time to replace.
Eson™ Mask Headgear Strap by Fisher and Paykel
This Product DOES NOT Require a Prescription.
The Fisher and Paykel Eson™ nasal CPAP mask has the ErgoFit headgear which is a breathable, ergonomically designed headgear that has been made to self fit high and on the rear of your head. This design allows for the complete freedom of movement whether you move your head sideways or even up or down. The headgear is extremely soft and made so that it will NOT irritate your head while being used treating your Sleep Apnea.
The Eson™ ErgoFit headgear incorporates VELCRO® tabs with easy clip hooks so that you have the ability for fast fitting or quick removal. The headgear also contains a crown strap that enhances the stability of your CPAP mask. The adjustments to the headgear are made at the crown strap (top of your head), at the forehead area of the mask as well as near the cheek where the easy clip hooks are located. These three areas of adjustable headgear allow for anyone to properly fit the Eson™ CPAP mask with little or no complication.
Included in This Package
- (1) Eson™ Headgear Strap (in selected size)
- (1) Pair Easy Clip Hooks
- Eson™ Complete Nasal CPAP Mask System
- Eson™ Replacement Cushion
- Universal CPAP Hose Tube
Recommended Replacement Schedule
- Cushion: Every 1-3 Months (or as needed)
- Headgear: Every 3-6 Months (or as needed)
- Complete Mask: Every 6-19 Months (or as needed)
- Hose Tubing: Every 3-6 Months (or as needed)
|Associated Part Numbers:||400449, 400450, 400451, 400HC567, 400HC568, 400HC569, 400HC126, 400HC127, 400HC128|
|International Shipping:||Yes, Available|
|US Shipping Cost:||Free Standard Ground|